Most Port Townsend chimney calls trace back to water - rain down the flue, stains by the fireplace, a damper rusted stiff, or creosote soaked sour by a leaking cap. We trace the leak to its source, show you what we found on camera, and fix the cause.
Your information is kept private and used only for your chimney service request.
From the rain-season leak trace to a camera inspection of a water-stained flue, these are the six chimney services Port Townsend homeowners book with us. This page covers chimney in Port Townsend, WA end to end — the services, the local picture and the ZIP codes served.
Sweep & Cleaning
Chimney Sweep
The full professional sweep: rotary brushes scrub the flue from top to bottom while a HEPA vacuum keeps every speck of soot sealed in — the visit that keeps a chimney safe to burn in. In Jefferson County, a cap check is part of the visit, because rain here tests every cap. That is chimney sweep in Port Townsend, WA, done the way it should be.
Get a free estimate
Sweep & Cleaning
Chimney Cleaning
Storm debris and evergreen needles settle into a Jefferson County flue all winter. Creosote, soot and ash removed from the flue, smoke shelf and firebox — the deep clean that kills the campfire smell and the fire risk with it. That local standard is what chimney cleaning in Port Townsend, WA means with Chimney Service Co.
Get a free estimate
Repair
Chimney Repair
Any chimney, any problem — leaks, cracks, crumbling brick, bad draw. A crown that ponds water instead of shedding it gets rebuilt to drain properly. Diagnosed on camera first, then repaired properly with the right materials. Booking chimney repair in Port Townsend, WA takes one call, and the tech arrives with everything the job needs.
Get a free estimate
Inspection & Care
Chimney Inspection
A full inspection of flue, liner, cap, crown, flashing and firebox — camera inside the flue, with a plain-language report of what is safe, what is not, and what can wait. In Port Townsend, the camera reads a wet flue closely: tiles washed by years of leaking rain, mortar softened from the inside, and tarry creosote from damp wood. The crews behind chimney inspection in Port Townsend, WA are the same ones who cover the ZIP codes listed below.
Get a free estimate
Install & Replace
Chimney Cap Installation
A quality stainless cap keeps rain, birds and sparks where they belong. Fitted to your flue, secured properly, and screened against animals. The screen keeps evergreen needles, cones and nesting birds out, so storm debris stops collecting on the smoke shelf between fires. Chimney Cap Installation in Port Townsend, WA starts with a real look at the problem — never a guess over the phone.
Get a free estimate
Repair
Chimney Liner Repair
Cracked tiles, gaps at the joints, a liner that is shifting — liner faults found on camera and repaired so hot gases stay inside the Port Townsend flue where they belong. In Port Townsend, years of water leaking in are the liner fault we find most on camera. It is why chimney liner repair in Port Townsend, WA keeps getting recommended to neighbors.
Get a free estimateNeed something else — a damper, a blower, a smoke problem, a bird in the flue? We cover all 27 fireplace specialties. Call (888) 258-0797 and describe it.
A chimney in Port Townsend is not fighting cold so much as water - months of rain, wind-driven storms and masonry that rarely gets a chance to dry out. This is what we actually find here, and what we check on every visit.
Moss, algae and ivy love a Northwest chimney, and they are not just untidy - growth holds moisture against the masonry and works roots into softened mortar joints. A chimney that stays green stays wet. We flag growth and the damp damage under it on every inspection in Port Townsend.
Wood stored outside in Northwest rain rarely dries fully, and damp wood burns cool and smoky. Cool, smoky fires lay down wet, tarry creosote that clings to the flue and smells sour for months. Regular sweeping matters more here, and so does burning the driest wood you can get.
Winter storms drop limbs, needles and cones into open flues across Port Townsend, and a blocked flue pushes smoke and carbon monoxide back into the room. Evergreen debris also holds moisture against the flue walls. A sound, screened cap keeps the flue clear through storm season without hurting the draw.
A cold, wet flue is hard to light: the first fire spills smoke until the flue warms and dries enough to draw. In Port Townsend that pattern often points to water in the chimney, a partial blockage, or a cap problem. We diagnose the cause instead of telling you to just burn hotter.
Port Townsend sits in Jefferson County, and the ZIP list at the bottom of this page covers 1 serviceable ZIP codes — 98368 through 98368. The closest served neighbors are Coupeville, Oak Harbor, Langley, and every one of them is covered by the same crews, the same day, under the same number: (888) 258-0797.
Same-day service, free estimates, licensed & insured — and a flue you can see on camera, clean from top to bottom.
Usually moss or algae, and it matters more than it looks. Growth holds moisture against the brick and works into softened mortar joints, keeping the masonry wet and speeding its breakdown. Removing growth without fixing the damp underneath does not last. We check the masonry under the growth and tell you what condition it is really in.
A wet, cold flue draws poorly until it warms, and water in the chimney makes that worse. The cause can also be a partial blockage from storm debris or creosote swollen with moisture. A tech checks the flue, cap and liner on camera in Port Townsend and fixes the cause, rather than treating every smoky startup as normal Northwest weather.
At least once a year if you burn regularly, and after roughly every cord of wood. Damp wood and cool, smoky fires - both common here - lay down wet, tarry creosote faster than dry wood and hot fires do. That buildup is both a fire risk and the source of the sour smell a wet flue carries all summer.
Not always. A liner cracked by freeze damage or washed by years of water leaking in can let heat and exhaust escape toward the framing. Liner condition is invisible from the firebox, which is why we inspect on camera. If sections have failed, we repair the liner so gases stay inside the flue where they belong.
Not before an inspection. A Northwest chimney may have decades of rain damage that never showed indoors: softened mortar, a rusted damper, a stained and cracked liner. One inspection tells you what you have, whether it is safe to light, and what to repair first, in a plain-language report you can keep.
No — and be wary of anyone who does. Every chimney fails differently, so a phone price is a guess that changes at your door. Our estimates are free: a tech looks at the actual problem, then gives you one clear price before any work starts.
Chimney Service Co is a national company with local technicians serving Port Townsend street addresses across the ZIP codes below — same-day service and free estimates, every day 8 AM – 8 PM. More of Washington is covered from our Washington page. The Port Townsend list below covers 1 ZIP codes, 98368 through 98368.
Don't see your ZIP? Port Townsend also uses P.O. Box and single-organization ZIP codes that have no street addresses — call (888) 258-0797 and we will confirm coverage for your street address on the call.
Also serving nearby: Coupeville, WA · Oak Harbor, WA · Langley, WA · Stanwood, WA · La Conner, WA · Mukilteo, WA.
Message sent.
Thanks — we'll get back to you shortly. Need it faster?
